Deciding which water purifier to buy has become easier. However, the complications begin when it comes to deciding where to install it. Where should it be placed? Is the water connection from the kitchen enough? Will there be enough space to open the cover and clean it? Every detail is very important.

Families who have recently purchased a Livpure water purifier can avail the Livpure RO Installation Service in Bengaluru. This will give them a properly installed purifier that is ready to use. A properly installed purifier takes out the guess work for the users in determining connections of various pipes.

As stated earlier, not all Bengaluru homes have the same kind of kitchen layout. Some have big kitchen counters, and some have very small sink areas. The type of model being installed and the connections available at the site play a big role in determining the best possible way to install the water purifier. We will now look at a few other points that may help.

 Prior to Booking Livpure RO Installation Service, Bengaluru

There are a few things that can be checked in the house prior to the service that can help save time and effort. It need not involve complicated plumbing work.

For example, checking the location of the shut off valve on the water line can be very helpful. It is usually located where the water line enters the house. Other than that, knowing the location of the drain tap and understanding the type of piping used in the house can be very helpful.

Make a rough decision as to where you would like your purifier to be installed. It is ideal to install it at a place from where you get drinking water, but it should not hinder your cooking or washing. If your kitchen is small, assess available wall space and counter area before making a decision.

Once you determine a general area

check the availability of water and electricity supplies. Each water purifier model requires a particular kind of electrical connection, and has specific requirements regarding water inlet and drainage. The technician can check the suitability of the location you have chosen.

Also consider who all use your kitchen. If children frequently fill their water bottles, ensure the purifier controls are within their reach. However, if older people use it, the purifier should not be placed at a hard to reach place.

Besides, do not make any changes to your kitchen to facilitate purifier installation before you confirm the actual requirements. This may sometimes involve drilling holes. Talking to the service provider can help you avoid undue hassle.

Purifier must be located in accordance with your kitchen routine. It should not be placed somewhere which requires you to move other containers to fill water.

For example

picture your kitchen counter already cluttered with a mixer and jars and supplies. Placing the purifier in the middle might look alright the first day, but it could really be irritating the second. A wall-mounted location might be more effective if your model allows this and the wall is appropriate.

Also, don't place the purifier too far from the sink to save space, you'll have to work around the water lines and connections.

Leave some clearance around the purifier for ease of use and maintenance. There are times when filters or other parts need to be replaced or serviced and the technician will need access to the unit. A tight space makes maintenance harder.

If you are moving into a rented apartment, it's best to speak to the landlord first, before making permanent changes. This is because some landlords don't mind wall drilling, while others don't want any changes that could potentially damage the property.

The exact process varies for different Livpure models and the condition of your kitchen. Generally speaking, the first thing the technician does is assess the proposed location.

The technician checks if the water inlet, electrical supply, and drainage are in the right places. If not, you can ask if additional fittings are needed.

Approval of the site means the purifier is installed as per the instructions. The required connections are made and the operation of the unit is tested. Leaks in fittings must be checked by the technician and the job is considered completed.

You should feel free to ask questions during the visit. You may want to know what the indicator lights mean. You may want to know when you need to call for maintenance or what you should do if the water flow changes. These are routine questions and it is better to understand the basics while someone is there to explain the functions.

You should ask if the purifier is ready to use or if it needs to go through any special cycle or preparation. You should follow the instructions for your model. Do not try to use the instructions for some other purifier.

You should ask about installation charges before fixing the appointment. There are several factors which determine the amount you pay. These include the terms of service, how the product was purchased, and the nature of work needed at the site.

Here are some questions to consider:

• -Is setup included in the cost of the purifier?

•  

• -Are additional fittings charged extra?

•  

• -Will there be an extra cost to make changes to the existing water connection?

•  

• - Is the quoted price the total price? Are there costs for testing included?

•  

• - Are there any provisions related to the product warranty?

You don’t need to formally ask all of these questions. Most can be clarified in a short informal conversation. Just make sure you understand the extent of the work included before approving changes.

You will want to consider these questions:

• - Was a location for the purifier chosen without verifying the water connection?

•  

• -Is there space for maintenance?

•  

• -Was water purifier installed tightly against a wall? This makes it difficult for the service personnel to access the unit for maintenance.

You will want to check that purifier piping is installed properly. Check for leaks where pipes connect to the purifier or where they connect to the wall. Contact service personnel if there are issues. You will want to check that connections are secure when purifier piping is shifted or adjusted. Ask a qualified technician how to do this properly if you need to shift the purifier.

Keep your user manual in an easily accessible place. While installing your Livpure Purifier, you may not think it’s important to keep the user manual. You will definitely appreciate having it to check an indicator or look up a maintenance instruction.

To use your purifier according to instructions, you will need to do an initial flushing and/or follow any recommended preparation steps.

The easiest thing to maintain on a purifier is its exterior. You can check the area around it to see if there is any moisture or other irregularities. There are a number of indicators or lights on a purifier. If you see anything that is out of the ordinary or if you notice unusual sounds, contact the service center or refer to your manual.

There are many factors that determine how often your purifier filters should be replaced. Sometimes replacement parts can be ordered from your service provider or Livpure, based on your usage and water quality.

Before leaving the house for a long time, check your purifier’s manual to see if there is anything you should be doing. Paying attention to these details will make day to day use of your purifier easier.

FAQ

2. Should I buy the purifier before choosing its installation location?

You can short-list a location beforehand, but you should always ensure that the model you are buying is the right fit for the spot. The size and other installation aspects of the model should be checked beforehand.

3. Can a Livpure purifier be installed in a small kitchen?

It can be installed in a small kitchen, provided that a suitable spot is available, and the necessary connections are accessible. The technician will check the available space and tell you the best possible location for the purifier model.

4. Do all Livpure RO models have the same installation requirements?

No, they don't. Different models may have different requirements. You should go through the user manual of the model in detail to check what connections are to be made. You may also seek assistance from the technician for the same.

5. What should I do if the purifier leaks after installation?

You may have to stop using the unit if water damage is a risk and contact the service provider for an inspection. Do not manipulate or try to force adjustments to fittings that you are not familiar with.

6. Does installation include future maintenance?

Most likely not. The provider may provide initial installation and ongoing maintenance as two separate services. You may need to ask the provider what is included in the initial service and how to get future maintenance done.

 Conclusion

Since the purifier is connected to your water supply, it needs to be sited and wired correctly the first time. Prior to engaging the Livpure Water Purifier Installation in Bengaluru check your kitchen space, understand the fittings and confirm the service costs. It is a good idea to understand how the various features work and follow the recommended maintenance schedule to avoid common issues and improve long term convenience.