Haryana Pollution Consent Board Consent refers to Consent to Establish and Consent to Operate issued by the Haryana State Pollution Control Board for covered industrial and non-industrial units.

The board issues CTE before construction and CTO before operations under the Water (Prevention and Control of Pollution) Act, 1974, and the Air (Prevention and Control of Pollution) Act, 1981. 

What Is Consent to Operate?

Consent to Operate is the environmental approval required before a covered industrial unit begins production or operational activities. It is issued by the State Pollution Control Board after the unit has installed the required pollution-control systems. 

Consent to Operate is commonly called a CTO certificate. It is different from Consent to Establish, which permits setting up the unit.

What Is Consent to Establish?

Consent to Establish is the first-stage approval for a covered project.

It permits the applicant to establish the unit. It does not permit commercial production or operations.

The CTE focuses on project planning, design, and pollution-control commitments. CTO focuses on whether those commitments have been implemented. 

CTE Certificate Under State Pollution Control Board

A CTE Certificate Under State Pollution Control Board is required before setting up a covered industrial unit.

The applicant must submit project details, site information, water balance and pollution-control plans. The board reviews these details before granting the CTE. 

After receiving the CTE, the applicant can construct the unit and install pollution-control systems.

CTO Certificate Under State Pollution Control Board

A CTO Certificate under the State Pollution Control Board is required before starting operations.

The applicant must show that the unit has completed construction and installed the required pollution-control systems. The board may inspect the premises before granting the CTO. 

Without a CTO, operating a covered facility may lead to closure orders, penalties or legal action. 

CTE and CTO Difference

In simple terms, CTE allows the business to build, while CTO allows it to function. 

CTE CTO Pollution Control

CTE and CTO Pollution Control refer to the two-stage consent process under environmental laws.

CTO is issued under the Water (Prevention and Control of Pollution) Act, 1974 and the Air (Prevention and Control of Pollution) Act, 1981, along with applicable state regulations. 

The board assesses whether the industry has installed pollution-control equipment and can comply with emission and discharge norms. 

When Is CTO Required?

CTO is generally required for:

• A new industrial facility starting operations.

• Expansion of existing production capacity.

• A change in production process that may increase pollution load.

• Regulated small-scale units that generate pollutants. 

Therefore, do not begin production or a trial run before obtaining the applicable CTO.

CTO Registration Process

Step 1: Determine Industry Classification

First, classify the unit as White, Green, Orange, or Red based on pollution potential.

This classification affects the consent requirement, documents, and inspection intensity. 1589

Step 2: Obtain CTE

Next, obtain Consent to Establish from the relevant State Pollution Control Board.

The CTO application can be submitted only after the CTE stage is complete.

Step 3: Prepare Documents

Prepare the CTE certificate, company records, land documents, plant layout, process-flow diagram and pollution-control plan.

Also, prepare details of effluent treatment, air-emission control, and solid-waste management. 

Step 4: Apply Online

Submit the CTO application through the relevant State Pollution Control Board or CPCB online portal.

Upload the required documents, pollution-control plans, and declarations. 

Step 5: Pay the Fee

Pay the applicable CTO processing fee.

The fee varies by industry category, scale, and state rules. 

Step 6: Inspection

The board may inspect the premises.

Orange and Red category industries generally require an on-site inspection. White and Green category industries may receive approval based on submitted documents, depending on the state process. 

Step 7: Obtain the CTO

After document verification and inspection, if required, the board issues the CTO.

Step 8: Maintain Compliance

After approval, operate pollution-control systems continuously.

Submit periodic compliance reports and renew the CTO before expiry. 

Central Pollution Control Board Registration

The Central Pollution Control Board Registration refers to registration with CPCB for certain waste-management frameworks, such as plastic packaging and battery waste.

CPCB is the central authority under the Ministry of Environment, Forest and Climate Change. It coordinates activities of State Pollution Control Boards and Pollution Control Committees and provides technical assistance and guidance. 

CPCB also maintains the consent-management framework and develops uniform application formats for Consent to Establish and Consent to Operate. 

Delhi Pollution Control Board

For a unit located in Delhi, apply to the Delhi Pollution Control Committee.

The DPCC issues CTE and CTO for covered units. It may inspect the premises and verify compliance before granting the CTO.

A unit must operate with a valid CTO from DPCC and comply with the consent conditions and notified discharge norms. 

Pollution NOC

“Pollution NOC” is a common term for CTE or CTO approval.

However, identify the exact approval required. CTE is a pre-establishment consent, while CTO is an operational consent. 

Validity and Renewal

CTO validity depends on the state and pollution category.

CPCB states that SPCBs and PCCs may grant CTO to Red, Orange, and Green category industries for validity up to 5 years, 10 years, and 15 years, respectively, subject to the applicable provisions. 1589

Apply for renewal before expiry to avoid penalties or operational disruption. 

Common Mistakes to Avoid

• Starting production with CTE only.

• Ignoring the industry classification.

• Submitting inconsistent project or pollution-control details.

• Missing CTO renewal deadlines.

• Failing to operate pollution-control systems.

• Assuming a pollution NOC is the same for every state.

Conclusion

The Haryana Pollution Consent Board issues CTE and CTO for covered units. CTE permits establishment, while CTO permits operation after pollution-control systems are installed. 1582

Prepare accurate project, land, water and pollution-control records. Then, apply through the Haryana State Pollution Control Board and maintain compliance with all conditions after approval. 

Frequently Asked Questions

What is Consent to Operate?

It is the environmental permission that allows a covered industrial unit to begin operations after pollution-control systems are installed. 

Is CTO mandatory for all industries?

It is mandatory for most manufacturing and industrial units that may impact the environment. Applicability depends on the industry category and state rules.

What is the difference between CTE and CTO?

CTE permits setting up the unit. CTO permits starting operations. 

Can CTO be transferred?

The competitor content states that CTO can be transferred on change of ownership, subject to informing the board and completing the required documentation. Confirm the current state process before transfer.