A Note for Cutting Fruits and Vegetables with Your New Battle-Ready Ninja Sword

0
14

If you are the owner of a new battle-ready ninja sword, there is a good chance that you are raring to get in the yard and put the thing to the test. 

There is also a good chance that, if that is the case, you have been researching what targets are appropriate for the sword so that you don’t damage it. 

Now, it follows that you have probably seen multiple guides suggesting fruits and vegetables, or even seen videos of martial artists using fruits or vegetables as targets. 

There is a good reason that they do. They are relatively inexpensive, easily accessible, and soft enough that they won’t damage the blade of your ninja sword. Ripe fruits and vegetables, since they are turgid with water (or juice, as it were) are also an absolute joy to use for cutting practice. That you will see soon enough if you’ve never done this before. 

But, that being said, if you do cut fruits and vegetables with your new ninja sword, you need to be very particular about one thing: what you do with the blade when you are done.

The Problem of Acid

If you do use your new ninja sword to cut fruits and vegetables, the good news is that, unlike paper targets, they won’t dull the edge at an accelerated rate.

The bad news is that fruits and vegetables are full of acids. Acid is highly reactive and will interact with steel to stain, discolor, or patina it. 

Now, there are some that appreciate the unique look of a patina on carbon steel. There are others who detest the fact that in a matter of minutes, acid on a carbon steel (or non-stainless, rather) will etch it. 

Once done, the etching and discoloration that acid will lend to a non-stainless steel blade is irreversible. The only thing you can do is prevent it. 

This means one very important thing: if you cut fruits or vegetables with your ninja sword, you must be judicious about removing the juice or any residue before you sheath the sword. 

It is not good enough to wipe the blade dry and then sheath it. You must rinse the blade and then dry it, preferably oiling it after drying it, before you store it. 

Even a sword that looks clean and dry after wiping the blade down (without rinsing) will have residue that will cause staining or etching. 

So the bottom line is this. After using your new ninja sword for live cutting practice: 

  • Wipe the blade down.
  • Rinse the blade.
  • Wipe the blade down again. 
  • Dry the blade.
  • Apply oil.
  • Then sheath.

Keep to this, and your blade will look good as new for years to come (as long as you care for it in other ways as well).

Don’t Have a Battle-Ready Ninja Sword Yet? 

If you landed here because you’re doing your research before getting a new ninja sword, here’s the good news: you can get one online at True Swords. Check out their collection and get in touch with them if you have any questions before you buy.

For more information About Crusader Sword and Realistic Katana please visit: True Swords.

Site içinde arama yapın
Kategoriler
Read More
Other
Europe Neurology Clinical Trials Market: Advances in Precision Neurology
Polaris Market Research has published insightful research on Europe Neurology Clinical Trials...
By Prajwal Kadam 2026-09-24 10:25:56 0 2K
Other
Pourquoi une station de taxi est-elle fiable pour les trajets quotidiens ?
Les déplacements quotidiens demandent souvent une solution simple et...
By Cornelis Maxim 2026-09-24 10:45:43 0 1K
Other
Power Factor Correction Market Trends and Growth Analysis with Forecast by Segments
The Power Factor Correction Market is covered by Business Market Insights with 2025 as the base...
By Sanket Khot29 2026-10-05 06:19:08 0 916
Other
Assessing the US Cloud ERP Market Landscape and Industry Outlook Through 2030
Cloud ERP long-term strategic value lies in its ability to provide a flexible, future-proof...
By Monica Scott 2026-11-17 12:42:48 0 38
Other
Kunli China Aluminum Alloy Wire Manufacturers Driving Aluminum Wire Market Expansion
The global demand for conductive materials continues to grow, and China Aluminum Alloy Wire...
By Jason Robby 2026-03-23 01:05:31 0 3K
SocioMint https://sociomint.com